8 Channel 20A Relay Control Module for Arduino UNO MEGA2560 R3 Raspberry Pi


53% OFF

Regular price 14.55 USD Sale price

30.96 USD

  • guaranteeQuality checked
  • Free ShippingFree on all products
  • Free return Within 7 days
  • ConsultancyLifetime 24/7/356
1. Bi-directional isolated 8 channel relay control module, according to users needs.
2. It can choose high or low electrical level to control the pick-up of the relay.
3. The module adopts genuine and high quality power relay, industry top-most ultra small package optocouplers, high power high dielectric transistor, RED signal lights, double side military grade PCB plate, overall consideration layout after overall consideration, with its stable performance.
4. It can be widely used in varieties of power control occasions.

Module Instruction:
1. The module adopts genuine and high quality relay, AC 125V/20A, DC 14V/20A.
2. With application of industry top-most ultra small Bi-directional optocouplers, the module has full noises immunity and stable performance.
3. Working voltage of the module is 5V.
4. The users could choose the electrical level of the relay, either the pick-ups occurs in high electrical level or low electrical level; the module contains current-limiting resistance, it can be controlled directly by the positive and negative electrodes of the power source, and also can be controlled by I/O console of the microcontroller.
5. The design of fault tolerant, even if the control wire was broken, yet the relay will take any action.
6. Humanization design of the interface, all the interfaces can be directly lined out through connecting terminals, which is very handy.
7. Providing 4 pieces retaining bolt hole, easy to install.
8. The Relays status indicator light (red).

The modules interface:
The modules control end: it has 11 lines of interfaces, all the interfaces can be directly lined out with wire, for the convenience of our users.
DC+: Termination connected to positive electrodes of the external direct current power.
DC-: Termination connected to negative electrodes of the external DC power.
VRFF: Photoelectricity isolated controlling end refers to the earth wire.
If VREF connected to the negative electrode of the power, when the termination at high electrical level (relative to VREF), the relay will pick-up accordingly.
If VREF connected to the positive electrode of the power, when the termination at low electrical level (relative to VREF), the relay will pick-up accordingly.

The relays outlet end:

There are 24 lines of interfaces, all the interfaces can be directly lined out with wire, for the convenience of our users.

NO1-NO8: The relays normally open interface, it is dangles before the relays pick-up, and short circuits with COM after the pick-up.
COM1-COM8: Common interface of the relay
NC1-NC8: Normally closed interface of the relay, It short circuits with COM before the relays pick-up and dangles after the relays picked-up.

Warm Tips:
Isolated relay module is used for adapting bad electromagnetic environment or occasions requiring good signal, demanding complete isolated effect, the power of users control panel(which is the reference power connected to VERM) and the source power of the relay module (DC+/DC-) shall be differentiated.
If this two powers are common ground, then it is not complete isolated effect, at this moment, users can choose our more economical standard type relay module.

Please allow 1-3cm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.

Package Content:
1 x Relay Control Module

We accept order cancellation before the product is shipped or produced. If the order is cancelled you will get full refund. We cannot cancel the order if the product is already shipped out. 
Returns (if applicable)

We accept return on products. Customers  has the right to apply for return within 14 days after the receipt. 
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. To complete your return, we require a receipt or proof of purchase. Please do not send your purchase back to the manufacturer. 
Customers will only be charged once at most for shipping costs (this includes returns); No-restocking to be charged to the consumers for the return of the product.
Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund yet, please contact us at service@zbest.com.

Please contact our Customer service at service@zbest.com to get the returned address.